logo
Nachricht senden
Startseite ProdukteTelekommunikations-Stromnetz

S5 Series ATSE 16A-630A for Telecom AC Power System

Bescheinigung
CHINA Tianjin Estel Electronic Science and Technology Co.,Ltd zertifizierungen
CHINA Tianjin Estel Electronic Science and Technology Co.,Ltd zertifizierungen
Kunden-Berichte
In den letzten drei Jahren ist unsere Zusammenarbeit, Dank für die technische Unterstützung Ihre Firma sehr nett und geduldiger Service, der Endbenutzer ist mit der Qualität Telekommunikationskabinetts des im Freien mit dem Abkühlen sehr erfüllt. Beste Wünsche zu unserer zukünftigen Zusammenarbeit.

—— Anthony

Fristgerechte Antwort, berufliche Qualifikationen, rigorose Haltung, schnelle Lieferung, sind wir sehr erfüllt, Zusammenarbeit sind sehr glatt.

—— Manish

Von 1 Probe bis 45 Sätze, 76 Sätze, 200sets, stellten wir allmählich ein starkes Vertrauen her. Die Kabinettqualität ist gut und der Entwurf ist angemessen.

—— Parmar

Die Klimaanlage sind für anderthalb Jahre gelaufen. Das Abkühlen effektiv ist gut. Guter Kundendienst und weisen geduldig an, um technische Probleme zu verwenden und zu lösen. Umweltüberwachungssystem läuft auch gut, und Fernüberwachung das Kabinett ist sehr bequem.

—— Luis Alberto

Die Kästen sind wir glücklich mit es groß. Wir bestellen 30 Sätze jeden Monat in der Zukunft. Arbeiten Sie glücklich zusammen.

—— Andrej Sliachin

Können uns guten Vorschlag zur Verfügung stellen immer und Lösung, sind wir sehr dankbar.

—— Nelson

Ich bin online Chat Jetzt

S5 Series ATSE 16A-630A for Telecom AC Power System

S5 Series ATSE 16A-630A for Telecom AC Power System
S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System S5 Series ATSE 16A-630A for Telecom AC Power System

Großes Bild :  S5 Series ATSE 16A-630A for Telecom AC Power System

Produktdetails:
Place of Origin: China
Markenname: ESTEL
Zertifizierung: CE UL FCC
Model Number: S5 Series ATSE
Zahlung und Versand AGB:
Min Bestellmenge: 1 Satz
Preis: 715-4286 usd
Verpackung Informationen: Kartonkoffer
Lieferzeit: 10 Tage
Zahlungsbedingungen: T/T, Western Union
Versorgungsmaterial-Fähigkeit: 5000
Ausführliche Produkt-Beschreibung
Eingabefrequenz: 50 bis 60 Hz Außengröße: L*W*H 130*34*54cm
Betriebsspannung: AC220/230V (2P), AC380/400V (3P/4P) Gleichstrom-Ausgang: 122,5 VDC/97-145 VDC
Arbeitsstrom (3P/4P): 16A bis 630A Gleichstrom-Eingang: 4*80-420Vdc / max. 23A
MPPT-Spannungsbereich: 120Vdc bis 340Vdc Spezifikation: Normal
Anwendung: Industrie Lastleistung (W): 150
Arbeitszeit (h): 24 Stunden, 10h Solarenergie (W): 10
Ausgangsfrequenz: 50/60 Hz Farbe: Verkleidung
Hervorheben:

S5 Series ATSE telecom power switch

,

16A-630A telecom power transfer switch

,

AC power system transfer switch

 

S5 Series Automatic Transfer Switch Equipment (ATSE) from 16A to 630A for Telecom AC Power System in L*W*H 130*34*54cm

 

Applications:

The ESTEL S5 Series Automatic Transfer Switch Equipment (ATSE) is suitable for AC power systems with a frequency of 50/60Hz, rated working voltage of AC220/230V (2P), AC380/400V (3P/4P), and a rated working current from 16A to 630A. It automatically switches one or several load circuits from one power source to another to ensure the normal power supply to the load circuits. This ATSE is suitable for important places like industrial, commercial, high-rise buildings, and residential areas.

 

Product Image :

 

     S5 Series ATSE 16A-630A for Telecom AC Power System 0           S5 Series ATSE 16A-630A for Telecom AC Power System 1

 

Operating Environment:

1.1 Surrounding Control Temperature: -5℃ ~ +40℃.

 

 

 

 

 

 

1.2 Atmospheric Conditions: The relative humidity of the air should not exceed 50% at the maximum surrounding temperature of +40°C. At lower temperatures, higher humidity is allowed. At an average lowest temperature of +25°C, the monthly average maximum relative humidity is 90%. Consideration should be given to condensation on surfaces due to temperature changes.

 

 

1.3 Altitude: The installation location should not exceed 2000m in altitude.

1.4 Pollution Level: The environmental pollution level at the installation site is Class 3.

1.5 Mounting Type: Vertical.

1.6 Installation Category: III.

 

 

Terminals and Wiring Instructions:

 

101-102: External indicator light for the status of Power Supply I, no-load signal port.

201-202: External indicator light for the status of Power Supply II, no-load signal port.

301-303: Communication ports for remote control of ATSE actions, reading switch status parameters, and fault codes.

401-402: Programmable, no-load, closed input ports. These can be defined for fire alarm linkage, prohibition of switching, or remote control. Select one of these three options. The default setting is fire alarm linkage.

403-404: Programmable, no-load, closed output ports. These can be defined for fault alarm, grid alarm, load shedding, fire feedback, or output for the two power supplies. Select one of these five options. When the selected function is triggered, the internal contact of the controller closes, outputting a signal. The default setting is fire feedback.

501-502: Default signal output port for generator start/stop. When Power Supply I is abnormal and Power Supply II has no power, internal contacts close, sending a no-load closed signal to start the generator. When the ATSE detects that Power Supply I has returned to normal, the internal contacts open, sending a generator stop signal. If the dual power supply output function is enabled, this terminal is defined as the Power Supply II abnormal output. When Power Supply II is abnormal, internal contacts close, sending an II abnormal signal.

601-602: Auxiliary power input ports. When the product requires delayed generator startup or needs remote monitoring when both power supplies are without power, a DC24V auxiliary power supply must be connected.

 

 

Inspection and Maintenance:

Pre-Power-On Inspection: After installation and wiring, it is recommended to inspect the setup to prevent errors. Check if the installation and wiring are correct, especially the main terminals like the power busbar. Ensure external signal lights are connected properly and check for short circuits. Tighten busbar screws reliably. It is recommended to disconnect the load before the first power-on adjustment. After confirming no issues, proceed with power- on testing.

 

 

 

 

Kontaktdaten
Tianjin Estel Electronic Science and Technology Co.,Ltd

Ansprechpartner: Ms. Fiona Liang

Telefon: +8613752765943 / 86-0755 23592644

Senden Sie Ihre Anfrage direkt an uns (0 / 3000)